Mark, I laughed when I saw your post, not at you but at beijers recipes.
I posted questions and asked mitsubishi people for years to show me exactly how to set up recipes on an e terminal. To date no one has succesfully told or shown me.
Many have posted 'how to's' but as I say, I have never managed it.
The manual is just too confusing and woefully short of explaining it. As a result, all my recipes have been done in the plc. That is far easier. You can make your own recipe screens and use buttons to move, read and write recipes. When I first tried them, the max memory in a plc was 2k but now with 4, 8 16K memories - recipes inside the plc are no bother.