Dear All,
Can you please give me some steps to communicate between S5 CP524 and S7 CP CP340 with 3964R procedure.
I have tested 3964R communication between two S7 CP340 and that is working very smoothly. But in case of communication between CP524 & CP340 I am totally lost.
1.I have burnt EPROM for CP524 with low priority-9600bps-8 bitdata-1 stop bit-even parity.I have two job nos. Job-1 is SEND ,with DB No-20, DW=0.
and Job-2 is FETCH, with Dest DB=10, DW=0.
2. I have called syncron FB in OB20,21,22,23.
3.I called RECV-ALL and SEND-ALL in OB1 at begining and End respectively.
4. Now first Question is should I program send & receive in S7 CPU also?
5. Should I call SEND DIRECT in S5 to send data from s5 to s7 ?
6.Should I call FETECH DIRECT or RECEIVE-DIRECT FB in s5 to receive data from s7 to s5?
7. Should we program EPROM with Procedure as well as Interpreter to use 3964R Protocol?
Please Help..
Can you please give me some steps to communicate between S5 CP524 and S7 CP CP340 with 3964R procedure.
I have tested 3964R communication between two S7 CP340 and that is working very smoothly. But in case of communication between CP524 & CP340 I am totally lost.
1.I have burnt EPROM for CP524 with low priority-9600bps-8 bitdata-1 stop bit-even parity.I have two job nos. Job-1 is SEND ,with DB No-20, DW=0.
and Job-2 is FETCH, with Dest DB=10, DW=0.
2. I have called syncron FB in OB20,21,22,23.
3.I called RECV-ALL and SEND-ALL in OB1 at begining and End respectively.
4. Now first Question is should I program send & receive in S7 CPU also?
5. Should I call SEND DIRECT in S5 to send data from s5 to s7 ?
6.Should I call FETECH DIRECT or RECEIVE-DIRECT FB in s5 to receive data from s7 to s5?
7. Should we program EPROM with Procedure as well as Interpreter to use 3964R Protocol?
Please Help..