Hi All,
I have four HMI buttons.
When one of these buttons is pressed I would like the other 3 to disappear.
I can make it work if Button 1 is pressed, then Button 2 will disappear but I need to add the 3 expressions to each HMI button.
(Working on Button 2 Visibility)
This is what I entered to start with:
• If{[topsidecoater]_HMI_b_LoopSelectionPB[0]} =0 then 1 else 0
How do I add if button 3 and 4 are pressed into this same expression.
Please see a word document attached for clarity.
Thanks.
irinjia
I have four HMI buttons.
When one of these buttons is pressed I would like the other 3 to disappear.
I can make it work if Button 1 is pressed, then Button 2 will disappear but I need to add the 3 expressions to each HMI button.
(Working on Button 2 Visibility)
This is what I entered to start with:
• If{[topsidecoater]_HMI_b_LoopSelectionPB[0]} =0 then 1 else 0
How do I add if button 3 and 4 are pressed into this same expression.
Please see a word document attached for clarity.
Thanks.
irinjia