c-bus to modbus gateway
- Thread starter theripley
- Start date
AlfredoQuintero
Lifetime Supporting Member
Hello. I do not know much about this protocol. maybe the product below can be helpful.
https://eref.se.com/au/en/clipsal/product-pdf/5500SHAC
https://eref.se.com/au/en/clipsal/product-pdf/5500SHAC
Similar Topics
Hello to everyone,
I need to comunicate With a Modbus gateway(TCP-RTU)connected throught Modbus TCP/Ip on wincc v7.5 or professional; i will...
Hello,
Sorry, my knowledge of communication protocol is limited, so thank you in advance for your answer.
My question;
I want to get 5 values...
I have some instruments that are Modbus RTU and I want to communicate to them (read information) over Modbus TCP.
What converters have you used...
Old thread: https://www.plctalk.net/qanda/showthread.php?t=114187
I have configured many other gateway before but I can't figure this out. It...
Hey guys!
I've been dabbling with getting a RS-485 device that uses modbus protocol into my SLC 5/05. I've steered towards buying a Modbus...