Has any come across a decent Industrial-Rated Cable Modem used for internet (Docsis 3.x) that they are using in their control panels?
I've talked to Electroline, but it just doesn't meet my requirements without some additional work.
https://electroline.com/products/temperature-hardened/drm31-series/
Its a pet peeve of mine when a device going into an industrial panel doesn't meet the following qualifications:
1. Terminals for 24vdc power instead of the "wall wart" barrel plug
2. 24vdc rated vs. other non-standard voltage (i.e. 12vdc).
2. DIN Mounted on the edge, or just DIN mounted in general.
I've talked to Electroline, but it just doesn't meet my requirements without some additional work.
https://electroline.com/products/temperature-hardened/drm31-series/
Its a pet peeve of mine when a device going into an industrial panel doesn't meet the following qualifications:
1. Terminals for 24vdc power instead of the "wall wart" barrel plug
2. 24vdc rated vs. other non-standard voltage (i.e. 12vdc).
2. DIN Mounted on the edge, or just DIN mounted in general.
