geniusintraining
Lifetime Supporting Member + Moderator
I Attached the cables that I'm using.
The software that I'm trying to connect with S5 is IBHsoftec
http://m.ebay.com/itm/370532524670?_mwBanner=1
http://m.ebay.com/itm/370204842972?_mwBanner=1
So you bought the TTY cable from me? but you did not buy our USB cable?... I am sure the TTY cable is good so do you have another USB adapter?
Our cable works perfect http://www.plccable.com/usb-to-rs232-plc-programming-cable-special-plctalk-net/
One other thing... I know that they had a limitation on the software, the demo would work fine but not connect to the PLC, are you using a demo or trial version?