TheWaterboy
Lifetime Supporting Member + Moderator
Can I "Path" my way through an L82 to an L61's serial port, to a radio network that uses DF1 to read/write to Legacy stuff ?
I have an L61 in the same rack and I can write the program within it if need be. But all I really need it for is the DF1 port if I can simply drill through it.
The MSG doesn't complain about the path as I can at least enter it into the MSG dialog without it failing to allow it. Which doesn't mean much I know.
i.e. L81 MSG Path = L61PLCname,2,35 (processor, port, DF1 Destination address)
It will be a while before I can test on live hardware so if it can't be done I'll go a different way. But it seems like it could.... Ken Roach to the lobby please ?
I have an L61 in the same rack and I can write the program within it if need be. But all I really need it for is the DF1 port if I can simply drill through it.
The MSG doesn't complain about the path as I can at least enter it into the MSG dialog without it failing to allow it. Which doesn't mean much I know.
i.e. L81 MSG Path = L61PLCname,2,35 (processor, port, DF1 Destination address)
It will be a while before I can test on live hardware so if it can't be done I'll go a different way. But it seems like it could.... Ken Roach to the lobby please ?