Can Factorytalk view Se get OPC data from FsGATEWAY

nochehuatl

Member
nochehuatl
Join Date
Jan 2012
Location
Cali
Posts
11
I tried doing this by adding a remote opc server running wonder ware on an Opto22 controler using ethernet. The topic comes through and is active but status is not available. Does any one know if Factory Talk is capable of importing fsgateway tags? Do I need a 3rd party OPC or is there a procedure in RSlinx or enterprise?

Thankso_O
 

Similar Topics

Y
FactoryTalk View SE 9.0 and KEPServerEX OPC
Hi everyone! I have a problem with FTVSE9.0 and Third Party OPC, i cannot read tags from opc server (KPEServerEX), and i do it without problems...
Replies
7
Views
5,616
Ken Moore
Ken Moore
R
FactoryTalk View - HMI Tags Via OPC Client ?
Hi - quick question. Can FactoryTalk View tags (HMI memory tags) be read via an OPC client ? I've setup a test FactoryTalk project with a couple...
Replies
1
Views
2,404
rdrast
rdrast
L
Cannot add OPC topic to FactoryTalk View Studio
Hello All, I need to add a SLC500 to FTView Studio and have run into a roadblock. The OPC topic is configured in RSlinx without a problem, but...
Replies
4
Views
3,926
ronny_resistor
ronny_resistor
O
FactoryTalk View SE digital alarm on a tag in Kepware OPC
Hello dear experts! Please advice me how to generate a digital alarm in FT VIEW SE A&E by one bit from a tag in KepwareOPC where this tag is a...
Replies
1
Views
3,347
Oleksandr_Husyev
O
P
FactoryTalk View and OPC Server (RSLinx)
I'm working with a new application that needs to talk to a SLC 5/04. I forgot that we can't bridge through a DHRIO (GRR!!!) so I am trying to go...
Replies
0
Views
3,146
phuz
P
Back
Top Bottom