Greg Dake
Member
Greetings!
I have an application where I am going to use IFM E12354 field wireable M12 D-Coded Ethernet connectors. (url below).
I have purchased a lot of industrial Cat5 cable over the years, but never any that will terminate in a 4 pin connector such as the E12354.
What is recommended for bulk Cat 5 cable for this type of connector? (Needs to be shielded, at least suited for IP67) Does not need to be high/continuous flex.
https://www.ifm.com/us/en/product/E12354
TIA,
Greg
I have an application where I am going to use IFM E12354 field wireable M12 D-Coded Ethernet connectors. (url below).
I have purchased a lot of industrial Cat5 cable over the years, but never any that will terminate in a 4 pin connector such as the E12354.
What is recommended for bulk Cat 5 cable for this type of connector? (Needs to be shielded, at least suited for IP67) Does not need to be high/continuous flex.
https://www.ifm.com/us/en/product/E12354
TIA,
Greg