Peter Laing
Member
Greetings All,
I'm looking for some advice on using a two monitor setup in Citect 2015 (7.5). I've been working with Citect for many years but I've never had a need for multiple monitors until now. Here's what's happening:
I've set the MultiMonitors parameter section in Citect.ini as follows:
Monitors = 2
StartupPage1 = A_Main
StartupPage2 = B_Main
So far so good. The respective pages display on monitors 1 & 2. But when I try to raise a popup window from the page on monitor 2 the popup displays on page 1. This is the command to raise the window : WinNewAt("PopupFaultA1AlarmStatus", 0, 0,(2+8+64+128+256))
Seems like this should be trivial. Any ideas guys?
Thanks,
Pete
I'm looking for some advice on using a two monitor setup in Citect 2015 (7.5). I've been working with Citect for many years but I've never had a need for multiple monitors until now. Here's what's happening:
I've set the MultiMonitors parameter section in Citect.ini as follows:
Monitors = 2
StartupPage1 = A_Main
StartupPage2 = B_Main
So far so good. The respective pages display on monitors 1 & 2. But when I try to raise a popup window from the page on monitor 2 the popup displays on page 1. This is the command to raise the window : WinNewAt("PopupFaultA1AlarmStatus", 0, 0,(2+8+64+128+256))
Seems like this should be trivial. Any ideas guys?
Thanks,
Pete