I monitor the PLC processor battery condition through a GSV instruction. When the battery gets low the GSV flips on a bit to trigger an alarm to be displayed on the RSview alarm page...after the battery has been changed, (power on of course) the PLC still needs to have the minor fault reset...
I want to reset this minor fault w/o grabbing a laptop and going to the PLC program
I want to clear it through the RSview me screen.....
What I need to know, but don't know how to do it, is to toggle that button...that says "Clear minors" when you go to
In the controller organizer, right-click the Controller
name_of_controller folder and select Properties.
Click the Minor Faults tab.
of the "Project" in Contrologix Project tree...At the very top...
What is the address or Contrologix "system bit" for that "Clear Minors" button?
I want to reset this minor fault w/o grabbing a laptop and going to the PLC program
I want to clear it through the RSview me screen.....
What I need to know, but don't know how to do it, is to toggle that button...that says "Clear minors" when you go to
In the controller organizer, right-click the Controller
name_of_controller folder and select Properties.
Click the Minor Faults tab.
of the "Project" in Contrologix Project tree...At the very top...
What is the address or Contrologix "system bit" for that "Clear Minors" button?