the_msp
Lifetime Supporting Member
Hi, can the C0-04DA-1 be configured as 0-20mA output... the datasheet only states 4-20mA, can it be reconfigured in the software?
Click analog out C0-04DA-1, 0-20mA?
- Thread starter the_msp
- Start date
bernie_carlton
Lifetime Supporting Member + Moderator
If you try setting it up in a project you will find it won't let you select less than 4.0 ma on the low end.
the_msp
Lifetime Supporting Member
OP
Thanks for confirming Bernie.
Similar Topics
I have a program that I am gradually piecing together (my first program).
There are 4 cascading timers that turn Y001 and Y001 + Y002 on and off...
I need to change my program to increase a IP transducer by 0.5 psi every 5 seconds. I am making a automated pressure tester using a pump, IP...
Click Plc/analog 0-10 v output module/0-10v dimmable led driver.
I made a program using multiple drum to create by increment fade in and out led...
Hi Guys,
How is Analog 4-20mA Level sensor Programmed in CLICK software of Automation Direct?
Which Instruction set.
Hi All
I'm trying to add an analog input module to my Click plc to attach some potentiometers to. I can't seem to get any data in my system...