the_msp Lifetime Supporting Member Join Date May 2008 Location Northern Ireland Posts 1,271 Jan 4, 2020 #1 Hi, can the C0-04DA-1 be configured as 0-20mA output... the datasheet only states 4-20mA, can it be reconfigured in the software?
Hi, can the C0-04DA-1 be configured as 0-20mA output... the datasheet only states 4-20mA, can it be reconfigured in the software?
bernie_carlton Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Yakima, Washington Posts 6,413 Jan 4, 2020 #2 If you try setting it up in a project you will find it won't let you select less than 4.0 ma on the low end.
If you try setting it up in a project you will find it won't let you select less than 4.0 ma on the low end.
the_msp Lifetime Supporting Member OP Join Date May 2008 Location Northern Ireland Posts 1,271 Jan 6, 2020 #3 Thanks for confirming Bernie.