Keyspan will also BSOD
Keyspan is great, but it has the same issue as the rest, caused by Windows (haven't tried the Moxa). If the USB cable from PC to Keyspan wiggles even slightly, Win10 Home does the BSOD. They've changed it now, but the results are still the same - hard crash - Latest updates not saved. This only happens while you are online with the PLC. Always stop communications before unplugging USB.
The solution is to regularly replace USB-A to USB-B cable. Using Device Manager, wiggle cable at PC. If it doesn't disappear, then proceed to online programming.
The P2000 uses a USB to Micro cable. Would be nice if the CLICK would add that. My genuine USB from AD won't run on WIN10.
I'm to the point now where I'll only use the CLICK's with the Ethernet port.
Recently, I've done a few projects with the P2000. I'm making that platform my first choice today. CLICK's only for the tightest budgets.
Keyspan is great, but it has the same issue as the rest, caused by Windows (haven't tried the Moxa). If the USB cable from PC to Keyspan wiggles even slightly, Win10 Home does the BSOD. They've changed it now, but the results are still the same - hard crash - Latest updates not saved. This only happens while you are online with the PLC. Always stop communications before unplugging USB.
The solution is to regularly replace USB-A to USB-B cable. Using Device Manager, wiggle cable at PC. If it doesn't disappear, then proceed to online programming.
The P2000 uses a USB to Micro cable. Would be nice if the CLICK would add that. My genuine USB from AD won't run on WIN10.
I'm to the point now where I'll only use the CLICK's with the Ethernet port.
Recently, I've done a few projects with the P2000. I'm making that platform my first choice today. CLICK's only for the tightest budgets.
Last edited: