Hey guys,
I have one of the new CLICK plc from AD with an ethernet port on it.
I made a subroutine for an IO Map of a modbus slave device I have connected on the same network. All the sub is, is a bunch of read commands to put the values into Int registers of the CLICK PLC. My problem is that the sub routine will only scan the first line of code. It won't scan the next line of code.
I know its not a problem with the slave device becasue I also am using Kepware to double check my slave and I can see all the values of the registers no problem.
PLCTALK.net wouldn't let me upload the file (maybe I was doing it wrong) so below is the dropbox link to the file:
https://www.dropbox.com/s/2kuciy5yq7ckexn/Ethernet_IP.ckp?dl=0
I have one of the new CLICK plc from AD with an ethernet port on it.
I made a subroutine for an IO Map of a modbus slave device I have connected on the same network. All the sub is, is a bunch of read commands to put the values into Int registers of the CLICK PLC. My problem is that the sub routine will only scan the first line of code. It won't scan the next line of code.
I know its not a problem with the slave device becasue I also am using Kepware to double check my slave and I can see all the values of the registers no problem.
PLCTALK.net wouldn't let me upload the file (maybe I was doing it wrong) so below is the dropbox link to the file:
https://www.dropbox.com/s/2kuciy5yq7ckexn/Ethernet_IP.ckp?dl=0