raywins
Member
I've got GE Fanuc 90-30 CPU331 / CMM311 commreq problems.
I've configured the 311 and the AGP3200 per GFK-0582D and Proface SNP-X comm manual for RS-232. Have the correct cable per Proface. My problem is finding an example of 90-30 PLC code to get the CMM311 talking with the CPU331. Yes, this is an old system being upgraded with a touchscreen, and I'm using LM90. Can anyone point to or email example of ladder to get these guys talking to each other? According to Proface tech support, their driver handles all memory types directly, after comms is established.
Thanks in advance!
I've configured the 311 and the AGP3200 per GFK-0582D and Proface SNP-X comm manual for RS-232. Have the correct cable per Proface. My problem is finding an example of 90-30 PLC code to get the CMM311 talking with the CPU331. Yes, this is an old system being upgraded with a touchscreen, and I'm using LM90. Can anyone point to or email example of ladder to get these guys talking to each other? According to Proface tech support, their driver handles all memory types directly, after comms is established.
Thanks in advance!
Last edited: