Codesys v3.5 SP12 - EtherCat interface

markopo

Member
M
Join Date
Aug 2009
Location
Wrzesnia
Posts
13
Hi.

I'm dealing with configuration communication by EtherCat in Codesys.
As written in docs I've installed WinPCap, had changed CODESYSControl.cfg, loaded project with EtherCat Master and imported XML for EtherCat device plugged into RJ45 plugin. I writed MAC address for NIC for EtherCat. Nothing.
All the time I get info about "Gateway not configured properly" when I try go into the "Online config Mode...".
Please for Your help.

Mark
 

Similar Topics

M
CodeSys - alternative to Siemens DB
Hello to all, I'm just starting with using CodeSys. Immediately, I have noticed that Codesys doesn't use data blocks like for example S7 does...
Replies
11
Views
127
dwoodlock
dwoodlock
H
Webvisu not showing Codesys V3.5 SP13 Patch 2
Hello, I am using a Hitachi Micro EHV+ for a small project, and I wanted to have a Web visu, done with Codesys V3.5 SP13 Patch 2. I test the...
Replies
6
Views
313
Zensequitur
Zensequitur
I
Dynamic Text Alignment in Codesys
Hello, I have a requirement to manage the text alignment dynamically. So, for example: 1. English Texts should be displayed from Left in...
Replies
0
Views
98
Indusha M
I
J
Codesys/Modbus/IFM CR1074 display questions
Hello, I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
Replies
1
Views
165
durallymax
D
larbi16
How to use Enumeration in Studio 5000 (CodeSys background)
Hi everyone, as this is my first experience with Rockwell Software i would like to know what's the best way to make Enumerations?
Replies
10
Views
518
durallymax
D
Back
Top Bottom