Hi all,
I’m an electrical engineering student doing my final year project which involves PLC work. The course is mostly focused on the power end of things but I have done a bit on PLCs, mostly programming.
My project doesn’t involve a physical PLC but uses RSLogix to write a ladder logic program which will communicate with InTouch through an OPC server. The problem I’m having is not programming but connecting RSLogix to the OPC server, it’s not something I am familiar with.
Here’s a few specifics:
Thanks for taking time to read this, any suggestions or tips would be much appreciated!
I’m an electrical engineering student doing my final year project which involves PLC work. The course is mostly focused on the power end of things but I have done a bit on PLCs, mostly programming.
My project doesn’t involve a physical PLC but uses RSLogix to write a ladder logic program which will communicate with InTouch through an OPC server. The problem I’m having is not programming but connecting RSLogix to the OPC server, it’s not something I am familiar with.
Here’s a few specifics:
- Im using RSLogix Micro Starter Lite version 8.30.00.
- The program is currently set up MicroLogix 1100 Series B.
- The OPC server is KEPServerEX with the simulator driver.
Thanks for taking time to read this, any suggestions or tips would be much appreciated!