comm link prob with dl105

prudent98

Member
P
Join Date
Feb 2011
Location
secunderabad
Posts
15
Hi i have a problem with koyo DL105 is not communicating with the PC.
error: No response from PLC. How could i communicate with the plc.


While i'm estalblishing a new link : protocol: ksequence
port: com2
address:1
error: NO response from PLC


while i'm connecting the PLC from DS programing
error: error unlocking PLC
 

Similar Topics

P
comm link prob with dl105
Hi i have a problem with koyo DL105 is not communicating with the PC. error: No response from PLC. How could i communicate with the plc...
Replies
1
Views
1,594
wolverine1981
wolverine1981
D
SMC D-MP025C cylinder position sensor w/ io-link comm,
Anyone program this doohickey using controllogix. If so, how and maybe an example. My brain hurts figuring it out
Replies
0
Views
1,395
davidhinch
D
A
DL260 Comm Link through a dialup modem
A dial in ethernet switch modem (SLX-5MS-MDM-1) connects PLC DL260, HMI EA7, and a computer through ethernet. ip address would be 192.168.0.10...
Replies
0
Views
2,229
AlecTek
A
R
Danfoss Aquadrive FC202 - Local command only if no comm
Hey guys. As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the...
Replies
2
Views
48
Revnus
R
A
Ethernet comm problem with PLC when inverter enables.
Hi; In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...
2
Replies
16
Views
514
Gleichner33
G
Back
Top Bottom