yassine.sfaxien
Member
Hello,
I am facing a huge problem with Dh-485 network configuration. In fact, my client has in his plant 2 Micrologix 1400 PLC and pv 600 (please find the architecture of network in attached file"network").
He asked me to change the old pv with pv+ 600. So, I used 1747-CP3 cable into DB-9 of 1761-net-AIC module and selected 1747-PIC/AIC driver in Rslinx Classic then ML and PV 600 appeared. (please view attached file "rs-who").
Next, I tried to configure a new path in Factorytalk view using rslinx enterprise (please view attached file "add driver selection") and selected serial DH-485 driver in local tab but unfortunately it didn't detect anything.
Would you please help me guys.
Thank you.
I am facing a huge problem with Dh-485 network configuration. In fact, my client has in his plant 2 Micrologix 1400 PLC and pv 600 (please find the architecture of network in attached file"network").
He asked me to change the old pv with pv+ 600. So, I used 1747-CP3 cable into DB-9 of 1761-net-AIC module and selected 1747-PIC/AIC driver in Rslinx Classic then ML and PV 600 appeared. (please view attached file "rs-who").
Next, I tried to configure a new path in Factorytalk view using rslinx enterprise (please view attached file "add driver selection") and selected serial DH-485 driver in local tab but unfortunately it didn't detect anything.
Would you please help me guys.
Thank you.