guitarguybs07
Member
Hello, I have a project where I need to use a CLX to communicate with a 3rd party device that exchanges data via XML formatted commands and HTTP POST/GET requests. I've done quite a bit of searching around the web and haven't really found anyone else doing this exact type of method.
Here is an example of a messages I would need to send/receive:
I know using SCADA or another intermediary device to handle the data exchange is probably the proper way to do it...but in the interest of figuring out all potential options would this also be possible with using the tcp/ip open sockets? Or is that asking for too much time and trouble lol Would using SCADA or other intermediary device to handle the data exchange be easier?
Thanks!
Here is an example of a messages I would need to send/receive:
I know using SCADA or another intermediary device to handle the data exchange is probably the proper way to do it...but in the interest of figuring out all potential options would this also be possible with using the tcp/ip open sockets? Or is that asking for too much time and trouble lol Would using SCADA or other intermediary device to handle the data exchange be easier?
Thanks!
Last edited: