Comparison between PLC's & Soft Controllers
- Thread starter Craig
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
There has been quite a bit of discussion on this forum. Try searching through the archives.
Most of the negative comments about soft PLCs are about the operating system rather than any inherent problems with the soft PLC itself.
Most of the negative comments about soft PLCs are about the operating system rather than any inherent problems with the soft PLC itself.
TimothyMoulder
Member
Similar Topics
Dear all
what is the comparison between PID controller and PLC?
when i can use PID controller?,
when i can use PLC?,
and
when i have to use PID...
i would like to ask for a detailed discussion regarding the comparison between plc and conventional control using relays and contactors in terms...
can any one tell me the comparison of cpu specification and modules of s7-300 and s7-1200 and also there cost
Per title - what's the worst and best wire duct brands you have worked with, and why? They all look the same on the outside, but there are...
I have installed a Cognex barcode scanner on a machine. I have a 1769-L18ER CompactLogix processor.
I have communication setup and working.
I...