Connecting a plc to the pc via eztouch

[powermonkey]

I was wondering if it is possible to communicate with the plc throught he eztouch screen? Also what software would be involved, and does directsoft handle this or would i have to go with screencreator? Thats it Thanks in advance.

PLC = DL05DR
eztouch = ez-s6m-r

 

[Rich1955]

Ad and Ez-Touch works well together.




http://.automationdirect.com



D0-05DR

8 DC IN / 6 RELAY OUT MICRO PLC W/AC P/S

​

$99.00​

EZ-S6M-R

ECONOMY 256K NOT EXPANDABLE MONO TOUCH PANEL 6IN

​

$425.00 ​

PC-PGM-BRICK

DIRECTSOFT PROGRAMMING S/W FOR 05/06/105 PLCS

​

$149.00​

EZ-TOUCHEDIT

PROGRAMMING SOFTWARE EZ TOUCH

​

$140.00​

D2-DSCBL

PC PGMING CABLE DL05/06 DL105 205 350 450

​

$30.00​

EZTOUCH-PGMCBL

EZTOUCH PROGRAM CABLE

​

$20.00​

EZ-2CBL TO ADC PLC RJ12 PORT EZ-TOUCH/TEXT CABLE $20.00
All most forgot the last cable

 

[Eric Nelson]

Based on the title of the thread, I think powermonkey wants to communicate between a PC and PLC through the EZ-Touch. As far as I know, you can't do this...

I assume you're using both COM ports on the PLC, and are looking for another way in? If the expansion slot is free, pop in an H0-ECOM (or better yet, an H0-ECOM100) and connect to your PC via ethernet...



-Eric

 

[Rich1955]

If he wants to look at the program then No.
But if he wants the PLC to make a spread sheet or graft in the touch screen and transfer that to the PC than yes.

Need a little more info.