Rsflipflop256
Lifetime Supporting Member
Wizards,
I am trying to flash this little HMI and have a usb to serial converter from automation direct, the blue one. I setup the com port and assigned according to the help documentation in the programming software, but it will not recognize the HMI.
Gives error code 2, command 18.
Any perspectives would be appreciated, happy Friday.
I am trying to flash this little HMI and have a usb to serial converter from automation direct, the blue one. I setup the com port and assigned according to the help documentation in the programming software, but it will not recognize the HMI.
Gives error code 2, command 18.
Any perspectives would be appreciated, happy Friday.