Hi
I have to modify ladder logic (using a notebook with RSLogix 5000) in a CompactLogix PLC with eweb module. The PLC is on a remote LAN, and with a VPN I can do this. Now, Is it possible doing this without a VPN? (connecting directly to the PLC?)
I tried, in rslinx, with an ethernet driver and an ethernet/IP driver (browsing remote subnet),setting the IP of the remote LAN, but it doesn't work. The PLC is connected via ethernet to the remote router. What's the port to be opened on the router of PLC's LAN? 44818? isn't it?
I applied this rule to the LAN IP of eweb module (192.168.1.2). Isn't correct?
I have to modify ladder logic (using a notebook with RSLogix 5000) in a CompactLogix PLC with eweb module. The PLC is on a remote LAN, and with a VPN I can do this. Now, Is it possible doing this without a VPN? (connecting directly to the PLC?)
I tried, in rslinx, with an ethernet driver and an ethernet/IP driver (browsing remote subnet),setting the IP of the remote LAN, but it doesn't work. The PLC is connected via ethernet to the remote router. What's the port to be opened on the router of PLC's LAN? 44818? isn't it?
I applied this rule to the LAN IP of eweb module (192.168.1.2). Isn't correct?