Dear Experts
Is it possible two have following functionality using conrologix processors & I/Os at remote
--
Best Regards
Muhammad Asim Khan
Is it possible two have following functionality using conrologix processors & I/Os at remote
- We have two separate redundant contrologix systems SYS1 & SYS2 (suppose) at two different location
- we have one remote chassis REM1 (suppose) having I/O cards
- Our requirement is that normally this remote chassis REM1 should be controlled by SYS1 over control net but in case if this controlnet link goes down only then REM1 should be controlled by SYS2
- Is it possible?
- if possible do we need to to put two CNBRs at REM1 one for SYS1 & other for SYS2.Then through programing when we feel that link of REM1 with SYS1 is not ok we will change control of REM1 to SYS2.
--
Best Regards
Muhammad Asim Khan