Hi,
I have to design a panel using Delta PLC. I need to interface the PLC with a Hydraulic Proportional valve having the following specs.
24 V DC Max Pressure at 800mA and Max Flow at 800mA.
The Analog O/Ps cannot handle such currents, so how do I interface the Valve & PLC?
Thanks for your replies
Ron
I have to design a panel using Delta PLC. I need to interface the PLC with a Hydraulic Proportional valve having the following specs.
24 V DC Max Pressure at 800mA and Max Flow at 800mA.
The Analog O/Ps cannot handle such currents, so how do I interface the Valve & PLC?
Thanks for your replies
Ron