Controllogix connection to ABB Drive

Rob Babu

Guest
R
We have drive application using ABB DCS500 dc drive with profibus protocol (using NPBA-12 profibus adapter module that support Profibus-DP and Profibus-DPV1 protocol). We want to connect all slave ABB drives to contrologix using MVI56-PDPMV1 module. Could we use this module to connect to ABB drives?
Thank you for your support.
 

Similar Topics

J
Controllogix to OPC Connection Issues
Hi, I have been banging my head on this problem for months, hoping to get some help from the experts here. I will try to make this short. The...
Replies
12
Views
3,928
Jmcwethy
J
S
ControlLogix Serial Connection
Hi, The problem i have is when i connect the plc ControlLogix 5000 through the serial port. In the who active window i see the plc with a...
Replies
4
Views
2,630
syd_b
S
F
Connection between MicroLogix 1100 and ControlLogix
I have a new MicroLogix 1100 and I am now trying to setup connection between it and our existing system with ControlLogix so that the new ML1100...
Replies
7
Views
5,350
Forrest
F
L
Beckhoff IPC and Controllogix PLC
I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
Replies
0
Views
91
lcabal27
L
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
103
Ken Moore
Ken Moore
Back
Top Bottom