JaxGTO
Member
Has anybody had luck with read/writing to an ABB RVG200 Paperless Recorder directly from a ControlLogix (Version 30)?
Looks like I may have to use the same Prosoft Modbus TCP card as I used for talking to a Yokogawa. I was hoping to avoid that this time. I know AB has PLC code to read/write Modbus TCP but it's really complicated. And if my customer see that code will hit the roof.
Thanks, Jack.
Looks like I may have to use the same Prosoft Modbus TCP card as I used for talking to a Yokogawa. I was hoping to avoid that this time. I know AB has PLC code to read/write Modbus TCP but it's really complicated. And if my customer see that code will hit the roof.
Thanks, Jack.
Last edited: