Controllogix Vs PCS7

As far as I'm aware PCS7 (if that's really what you need) is only available with 400 series H/W and this will not change in the near future. We got our first 1500 a couple of months back (before the official launch) and it's only a replacement for the 300 series at present, although that may change in the future.
 

Similar Topics

I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
Replies
0
Views
64
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
89
Hello, I have two 16 point input cards and 1 16 point output card showing module faulted on my IO tree in Logix Designer. The fault code is...
Replies
7
Views
223
Hello, My associate and I are trying to sync up two ControlLogix racks (7-slot chassis) with identical modules. We are able to see the secondary...
Replies
4
Views
208
Trying to setup a message read via Ethernet. I have the path setup as 1, 1, 2, 192.168.66.10 I get an error code 1, ext err 315. I am beating...
Replies
9
Views
243
Back
Top Bottom