Contrologix with Ultra3000i Indexing Position

sparkleplc

Member
S
Join Date
Aug 2011
Location
Canada
Posts
15
I have a servo drive Ultra3000i running with a Contrologix connected via DeviceNet. There are index positions set with their positions using the Ultraware software.
We need to now be able to change the index position defaults via Contrologix. Devicenet Tag Generator created BOOL bits in the Output ( Assembly 9). Now in order to change index position, I am putting the parameter number in byte 5 and data value in byte 7. But for some reason the indexing doesn't change at all.

Anything I am doing wrong?
 

Similar Topics

S
contrologix 5580 and pf527
Can anyone confirm that using contrologix 5580 controller is not possible to work with powerflex 527? It's been a couple of days now that i am...
Replies
8
Views
1,196
mike3475
M
D
Contrologix PID output locks up
Hello, I have a flow control PID that keeps locking up. It seems to control fine but after a while the output no longer moves. For instance...
Replies
4
Views
971
diat150
D
S
I can not add any I/O modules to contrologix's backplane
Hi everyone, I can't add any modules to the Controllogix backplane and it doesn't matter online or offline. Both is not working. Please see the...
Replies
13
Views
2,992
sinanmoral
S
I
PLC5 - Contrologix com with MSG
Hello, I have a question regarding the possibility of using messages instructions to communicate between: PLC5/80E Series D - CE Water Mark...
Replies
12
Views
3,066
TheWaterboy
TheWaterboy
P
ABB RETA-01 Card to Contrologix PLC
I have a customer who wants to control his DCS800 drives via Ethernet, so I have bought two RETA-01 cards. At the moment they are connected via...
Replies
1
Views
1,002
sparky66
S
Back
Top Bottom