skywalker309 Member S Join Date May 2010 Location Reynosa Posts 28 Aug 4, 2010 #1 Hi. I´m trying to upgrade some machines in my plant. I want to change some SLC100 and SLC150 into SLC500 or Micrologix. Is there a way to convert the program? Or do I have to write the program once again? Thanks.
Hi. I´m trying to upgrade some machines in my plant. I want to change some SLC100 and SLC150 into SLC500 or Micrologix. Is there a way to convert the program? Or do I have to write the program once again? Thanks.
TConnolly Lifetime Supporting Member Join Date Apr 2005 Location Salt Lake City Posts 6,152 Aug 4, 2010 #2 Unfortunately, you'll have to do the conversion by hand. There isn't a conversion utility. I suggest you use a Micrologix - it will fit the footprint better, and they cost considerably less.
Unfortunately, you'll have to do the conversion by hand. There isn't a conversion utility. I suggest you use a Micrologix - it will fit the footprint better, and they cost considerably less.
skywalker309 Member OP S Join Date May 2010 Location Reynosa Posts 28 Aug 5, 2010 #3 Well, I'll do it that way, thanks.