Cp1e e30 with cp1w mad11

Hari krishnan

Member
H
Join Date
May 2019
Location
Tamilnadu
Posts
1
Hi Sir,
I'm doing a scaling test of 0-10v in CP1W-MAD11 with Omron CPU - CP1E E30DRA,But I'm unable to configure the I/O Table & Unit Setup. Is it possible to interface CPIE PLC with CP1W-MAD11?
 

Similar Topics

B
Problem with delayed switch on of omron sysmac cp1e
Hello. I have a problem with omron sysmac cp1e controller delayed start. The controller has been working on the punch press since 2016. Recently...
Replies
1
Views
764
tdoa
T
L
Unable to get data to CP1E from Hyperterminal
Hello, I am trying to connect my CP1E-NA20DR-A with hyperterminal and get data from hyperterminal to the PLC. I used RXD instruction to store the...
Replies
4
Views
2,111
PreLC
P
K
Omron CP1E Ethernet (TCP/IP) communication
Hi, I need to communicate omron CP1E PLC with SCADA to get the status of the machine. There is no etherent port available but an empty expansion...
Replies
2
Views
1,609
karthiknd7
K
J
how to factory reset omron CP1E
Hello... I remove one CP1E from old useless machine and I would like to use it with something else....but it is locked/have no pass/....How can I...
Replies
0
Views
1,446
Jirrr
J
R
omron cp1e real time clock
hi all i have used a real time clock to turn on a bit after 1 month. the plc was off for this whole month and when i turned on the plc after a...
Replies
2
Views
1,423
RAJNAIK
R
Back
Top Bottom