CP1H PLC with SICK Lector 620

PoseidonHo

Member
P
Join Date
Mar 2013
Location
Puchong
Posts
14
Hi,

I have a CP1H PLC with CP1W-CIF14 (Ethernet) that connect to the SICK Lector 620(Bar Code Reader).

The SICK reply ASCII code through Ethernet, so I use CP1iW-CIF14 as communication module to CP1H slot 2.

Once the SICK giving ASCII code, which instruction I need to use to receive data. RXD, RXDU or RECV?

Currently i trying use CP1W-CIF01(RS232) send data to hyper terminal at COM but it seems not working with TXDU and SEND.


Any Idea?
 

Similar Topics

K
Analog Output Trouble in Omron CP1H PLC
Hello Sir/Ma'am, Hope you and your family are safe in this Covin-19 Pandemic. One of my client have a machine in their ceramic industry which...
Replies
0
Views
2,617
kelvinviroja93
K
P
How to interface CP1H Omron PLC to wonderware ITME 8.0
hi.. i have done build a ladder program with CP1H Omron PLC and i want show the result in Wonderware intouch machine edition 8.0 software, How...
Replies
2
Views
2,376
pajonec
P
V
Help in overwriting protected Omron PLC CP1H
Hi, I have very limited knowledge in PLC. I uploaded the updated version of the software from our supplier on Omron PLC CP1H. It was also UM...
Replies
8
Views
13,889
vb1095
V
P
omron cp1h plc communication issue
hi , I am new to omron plc ,plese help regarding below issue. i am communicating with omron plc by serial port. by clicking on direct...
Replies
2
Views
5,995
prusty.purna1
P
P
Omron cp1h fins 2108 error after plc power down
I have a CP1H with a CIF41 ethernet module. Only one PLC is on the network and is the only device that should be receiving commands. I am able to...
Replies
0
Views
4,748
patrickser
P
Back
Top Bottom