CP5511 problem...

[HansAndersen]

I can not have the plc communicated with PG.

I have attached both network diagnostic and hardware.What may the reason of this problem.

 

[10BaseT.]

"Tamam" ? Turkish or arabic ?
Problem likely to be exactly what the pop-up tells you - have you autodetected the network ? if not try it , sounds like the network parameters don't match the card settings .

 

[bill4261]

Have you tried disconnecting the other devices on the network and connecting your pc directly to the port on the pc? The other devices/communications cable could be hosing up the communications.

 

[10BaseT.]

Have you tried disconnecting the other devices on the network and connecting your pc directly to the port on the pc? The other devices/communications cable could be hosing up the communications.

The it is assumed that the BF light would be illuminated if it is that desperate . One also assumes that the system is running , though knowing the way people love to give the story bit by bit just to keep us interested , who knows ?