jacquesp
Member
Hi
I have a Crimson 3.1 project which have conditional images and buttons managed by parameters shared with a PLC across a Modbus interface.
What I find is when moving back and forth between screens the conditional images/Buttons do not always display immediately and takes the odd second or so before they display.
When I add the controlling parameters for images/buttons to the "Watch Window" to see if they some how change state, thus causing the behaviour. The relevant buttons and images I'm monitoring stop exhibiting the behaviour and constantly display as I would expected.
When I turn the monitoring off they again from time to time have a delayed display time before the conditions for display seems to kick-in
Any thoughts or suggestions?
I have a Crimson 3.1 project which have conditional images and buttons managed by parameters shared with a PLC across a Modbus interface.
What I find is when moving back and forth between screens the conditional images/Buttons do not always display immediately and takes the odd second or so before they display.
When I add the controlling parameters for images/buttons to the "Watch Window" to see if they some how change state, thus causing the behaviour. The relevant buttons and images I'm monitoring stop exhibiting the behaviour and constantly display as I would expected.
When I turn the monitoring off they again from time to time have a delayed display time before the conditions for display seems to kick-in
Any thoughts or suggestions?