We have a PLC and Redlion HMI set-up.
Power is supplied via 2x12 V batteries in series hooked up to a battery charger.
Over the week-end we lost power and the batteries ran down.
This morning the HMI had an "invalid database" message on the display.
I have the databases on CD.
Which is the best/easiest way to reload the database.
Step by step instructions would be appreciated.
Power is supplied via 2x12 V batteries in series hooked up to a battery charger.
Over the week-end we lost power and the batteries ran down.
This morning the HMI had an "invalid database" message on the display.
I have the databases on CD.
Which is the best/easiest way to reload the database.
Step by step instructions would be appreciated.