Crimson 3, Legacy primitives.

Elcan

Lifetime Supporting Member
Join Date
Apr 2008
Location
NC
Posts
935
In the Crimson 3 manual you can read (regarding one of the legacy primitives): "While they can be useful, they are likely to be superseded by more powerful primitives in a later release of Crimson...".
Yes, the legacy primitives are not very fancy.
Is there any estimate schedule for the new primitives (Slider, Vertical Scale, Dial Gauge, etc.)?
 

Similar Topics

Hey guys, hoping someone here could give me a little advice. I'm working with a CR1000-04000 in Crimson 3.1 and I was interested in adding the...
Replies
4
Views
126
Hi, I'm having an issue in crimson 3.0 when I create a programme using a case statement referencing a fault word that each bit needs to change the...
Replies
5
Views
262
How do you install update on Red Lion Crimson ver 3.1. Do I just need to run the exe file on the host server?
Replies
1
Views
115
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...
Replies
0
Views
100
Has anyone setup communications with Red Lion 3.0 MODBUS to Baker Hughes Centrilift GCS VFD? Thanks
Replies
0
Views
92
Back
Top Bottom