I have a challenging one for any CTI gurus out there. We currently have changed our processor over to a CTI 2500 from a siemens 555 trying to talk to cluster of moores. Here is the path. CTI 2500 to RBC (505 6851a) to SIMATIC 386/ATM (505-ATM) to a Moore ICI (Model 320). The Moores aren't talking to the controller even though with the original siemens 555 everything communicates fine. Any thoughts would greatly be appreciated.
CTI 2500 communications to ATM via remote rack
- Thread starter ryancoco
- Start date
Similar Topics
I'm having trouble programming a PID loop in 505 workshop. Are there any examples out there of how to program this, or how it even works? I got a...
Can a Siemens TP277 communicate with a CTI2500 CPU via the ethernet port? There are only DP and serial selections for the Simatic 505 in the WinCC...
Hi All,
Long time since my last visit.
I have a problem with my TI/Siemens505/CTI PLC. I need to configure new IO in the existing Profibus IO...
Hi There,
I have a problem with my CTI 2500-C200 CPU; It is anew release with Firmware 6.02 and CPLD 6.02.
My CPU is getting a Fatal Error with...
Hi
We have a CTI 2500 CPU that we want to use to communicate with a S7-300. I got the example from CTI on how to do the programming using a 2572...