Cw and CCW pulse control

[muds]

hi all,
i want to control my stepper motor with my Delta dvp PLc,, how can i control pulses, steps and directions of motor though it,,

thanks in advance

 

[BITS N BYTES]

Step 1 = read the manual!!

 

[just the cowboy]

Check to see if it can

Not all PLC's can do motion control, check to see if yours does. If not automation direct has a DC DL05 with pulse step output for aqround $120 us

 

[shooter]

what voltage is the output of the PLC and what input has the stepper driver?

 

[shooter]

what are the voltages and a PLC is not fast enough on its normal ports so you will need a special card for it.