Danfoss OEM drives

rhythm_stick

Member
R
Join Date
Aug 2023
Location
Edmonton
Posts
1
I've had a Danfoss OEM drive come in from an Ingersol compressor. It is essentially an FC302 but the OEM part is IR302. the drive appears to be trip locked and has no keypad and thus no way to read out a fault code. Would any of you know how I can get a fault code out of this drive.
I've tried the MCT software but I have limited functionality when using the FC302 profile, i cannot find the IR302 profile.
 

Similar Topics

R
Danfoss Aquadrive FC202 - Local command only if no comm
Hey guys. As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the...
Replies
2
Views
48
Revnus
R
B
Danfoss Inverter DC over voltage fault
Hi all, We are currently experiencing an DC over voltage fault on one of our inverters. During commissioning a snag was raised whereby excess...
Replies
0
Views
202
barryoc
B
L
Danfoss fc 360 updated SW
hey guys i've been trying to find an updated SW files of my danfoss fc360 for MCT 10 software but i couldnt be able to find it anywhere on...
Replies
0
Views
255
Levi_Marshall
L
ceilingwalker
Danfoss VLT Midi Drive FC 280 encoder question
Hello all. I am hoping someone here has installed a Danfoss VLT Midi FC 280 and connected an encoder to it. I am just trying to make sure I select...
Replies
0
Views
462
ceilingwalker
ceilingwalker
A
Ethernet IP Micro 800 with Danfoss FC202
Good morning! I'm trying to communicate a Micro 850 (2080-LC50-AWB) with a Danfoss FC202 by VLT 121 MCA Ehternet ip card. I can read the value...
Replies
0
Views
453
ale_9603
A
Back
Top Bottom