janner_10
Lifetime Supporting Member
I am successfully logging to a network location with a PV+ 7.
However, every time the project starts after a reboot, I get presented with this screen, despite the Network Identification settings being filled out in the Terminal Settings.
The additional downside is that the inputs dont bring up the keyboard so you have to use a USB keyboard or access via VNC
Anyone have any ideas?
However, every time the project starts after a reboot, I get presented with this screen, despite the Network Identification settings being filled out in the Terminal Settings.
The additional downside is that the inputs dont bring up the keyboard so you have to use a USB keyboard or access via VNC
Anyone have any ideas?