celichi
Lifetime Supporting Member
Hello Everyone,
I was wondering if anyone has some advice/options for me to consider.
I need to control DC Voltage/Current to a device.
The device can accept 20 to 300 VDC and 1 to 5 amps.
I need to be able to control and monitor the Voltage and Current with Compact Logix PLC, so 4-20 is okay, would be nice to have Ethernet/IP, but I know this is a big ask.
Ideally I would give the power supply a current command to run at, and it would increase the voltage to obtain the current, or until it maxed out at 300 VDC.
I am currently using a regulated power supply with a current command, but it only has 0-10VDC signals, and I would like to see if there are any better options out there.
Best to all!
Paul
I was wondering if anyone has some advice/options for me to consider.
I need to control DC Voltage/Current to a device.
The device can accept 20 to 300 VDC and 1 to 5 amps.
I need to be able to control and monitor the Voltage and Current with Compact Logix PLC, so 4-20 is okay, would be nice to have Ethernet/IP, but I know this is a big ask.
Ideally I would give the power supply a current command to run at, and it would increase the voltage to obtain the current, or until it maxed out at 300 VDC.
I am currently using a regulated power supply with a current command, but it only has 0-10VDC signals, and I would like to see if there are any better options out there.
Best to all!
Paul