MrQ Member M Join Date Feb 2005 Posts 236 Mar 13, 2006 #1 Hello, I am looking for a DC/DC converter with 24V in and +/-10V on the output. It is to be used as a reference voltage so about 50mA will be enough. Does anyone have any good suggestions? Thanks in advance.
Hello, I am looking for a DC/DC converter with 24V in and +/-10V on the output. It is to be used as a reference voltage so about 50mA will be enough. Does anyone have any good suggestions? Thanks in advance.
dalem Member D Join Date Sep 2005 Location NE Wisconsin Posts 104 Mar 13, 2006 #2 Perhaps? (See link below. http://www.monolithicpower.com/prd_02_dcsd_cnvr.htm
krk Lifetime Supporting Member K Join Date Aug 2004 Location Kent Posts 795 Mar 13, 2006 #3 We use these when we want low power DIN rail mounting DC/DC converters. See page 3 on attached file....
We use these when we want low power DIN rail mounting DC/DC converters. See page 3 on attached file....
yuzu Member Y Join Date Oct 2005 Location Christmas island Posts 5 Mar 13, 2006 #4 i had just recently purchased a new drive so have all of the links still try http://www.kbelectronics.com/kbsearch/search_1.php http://www.directindustry.com/ http://motion-controls.globalspec.com/Industrial-Directory/DC_drive hope it helps
i had just recently purchased a new drive so have all of the links still try http://www.kbelectronics.com/kbsearch/search_1.php http://www.directindustry.com/ http://motion-controls.globalspec.com/Industrial-Directory/DC_drive hope it helps
MrQ Member OP M Join Date Feb 2005 Posts 236 Mar 14, 2006 #5 Thank you all! I ordered the one from MURR ELEKTRONIK.