Hello,
I'm currently running a Siemens 300 plc as a Profibus Master.
There is a Deif AGC connected as a Slave, and I am reading out data from it.
There is an Active Energy Counter (kWh) parameter in the Deif, which is split into two Words, and they are HI and LOW.
I am trying to read this into a DB in the Siemens machine, but am having problems with the HI and LOW. The values do not make sense.
Has anybody read out this type of data from Deif units before, and can tell me what the HI/LOW means?
I load them out like this:
example:
L PIW314
T DB12.DBW26
Thanks!
I'm currently running a Siemens 300 plc as a Profibus Master.
There is a Deif AGC connected as a Slave, and I am reading out data from it.
There is an Active Energy Counter (kWh) parameter in the Deif, which is split into two Words, and they are HI and LOW.
I am trying to read this into a DB in the Siemens machine, but am having problems with the HI and LOW. The values do not make sense.
Has anybody read out this type of data from Deif units before, and can tell me what the HI/LOW means?
I load them out like this:
example:
L PIW314
T DB12.DBW26
Thanks!