I am facing a Problem while configuring Delta HMI Alarms.
There is only one Address where I can specify only one word and there are list of Number/Array where I can specify the Alarms.
1-Pump 1 Trip
2-Pump 2 Trip
3-Pump 3 Trip
But All My Alarms specify on Bits how i Convert it in Word at HMI side?
I make one word register at PLC side and used it but its behavior also different.
If Register Value =1
Alarm=Pump 1 Trip
If Register Value =2
Alarm=Pump 2 Trip
If Register Value =3
Alarm=Pump 1 Trip
Alarm=Pump 2 Trip
There is only one Address where I can specify only one word and there are list of Number/Array where I can specify the Alarms.
1-Pump 1 Trip
2-Pump 2 Trip
3-Pump 3 Trip
But All My Alarms specify on Bits how i Convert it in Word at HMI side?
I make one word register at PLC side and used it but its behavior also different.
If Register Value =1
Alarm=Pump 1 Trip
If Register Value =2
Alarm=Pump 2 Trip
If Register Value =3
Alarm=Pump 1 Trip
Alarm=Pump 2 Trip