Alan Case
Lifetime Supporting Member
Hi. Does any one have the cable details ie pin to pin for an Allen Bradley 2702-DNC. It is a devicenet configurator that uses a common port to connect to either a devicenet network or to a RS232 port.
I have found a description of the pins on the unit (8 pin mini din) but would like to make the cables to connect to a network and also to a RS232 port on a PC.
Pin 1 11-25v dc from Devicenet
Pin 2 VDC common
Pin 3 Cable sheild
Pin 4 Receive data RXD
Pin 5 CAN-L
Pin 6 CAN-H
Pin 7 Transmit data TXD
Pin 8 Signal ground
shell
Looking at it now I think I can figure out that pin 1,2 3,5,6 would connect to the devicenet network so is there any one out there who can figure out the connections for the configurator to rs232 port.
Thanks in advance. Alan Case
I have found a description of the pins on the unit (8 pin mini din) but would like to make the cables to connect to a network and also to a RS232 port on a PC.
Pin 1 11-25v dc from Devicenet
Pin 2 VDC common
Pin 3 Cable sheild
Pin 4 Receive data RXD
Pin 5 CAN-L
Pin 6 CAN-H
Pin 7 Transmit data TXD
Pin 8 Signal ground
shell
Looking at it now I think I can figure out that pin 1,2 3,5,6 would connect to the devicenet network so is there any one out there who can figure out the connections for the configurator to rs232 port.
Thanks in advance. Alan Case