504bloke
Lifetime Supporting Member
I have just finished testing some panels and have attached the devicenet and logix files
Apart from rung comments etc is there anything i am missing here ?
I wired and tested the units and all seems to work fine
Never having used devicenet before i thought id ask before i wire up on site and have any problems with the software
i have just included in the logix software the devicenet stuff only for clarity!
The Scanner is on Rack 1 Slot 11 and is talking top a 590+ DC Drive and two 690 AC Drives
I have configured the SSD drives with configedlite and they seem all ok, ill attach the drives config files tomorrow as i have left these at work!
Apart from rung comments etc is there anything i am missing here ?
I wired and tested the units and all seems to work fine
Never having used devicenet before i thought id ask before i wire up on site and have any problems with the software
i have just included in the logix software the devicenet stuff only for clarity!
The Scanner is on Rack 1 Slot 11 and is talking top a 590+ DC Drive and two 690 AC Drives
I have configured the SSD drives with configedlite and they seem all ok, ill attach the drives config files tomorrow as i have left these at work!