DH+ Error

[TSmith]

Can anyone point me to location to find AB DH+ error codes. I've searched here and AB site without any luck.

I have had a slc 5/04 connected by DH+ to a PLC5/40 for a year, everything has been ok. I connected another SLC 5/04. When connected thru RsLogix5 or 500, I keep getting kicked offline. RsLogix 5 says DH ERROR 208. Any Ideas?

Thanks
Tony

 

[LJBMatt]

What version of RSLinx are you using? There is a hotfix for RSLinx ver. 2.5 for the KT-1 driver. The best place to search would be the knowledgebase - http://www.rockwellautomation.com/knowledgebase/ Type in RSLinx hotfix to download the patch.

 

[Oakley]

Just a stab in the dark, have you changed the default node number of the SLC504? By default, they are node 1.

 

[Mickey]

Uncheck the Autobrowse in RSLinx.

Unchecked:

 

[mordred]

the only reference I could find on that error code was destination and source mismatch however it was for a 1775 ka

 

[TSmith]

I cleared the proc memeory and reloaded. It's working now

Thanks
Tony

 

[Christoph]

What is the node # of your laptop?