JLDrescher
Member
Completed alot of .pdf's, Still unsure what direction to proceed.
Want to use SLC/5/03 OS302 B Rev10.Channel-0 [DH485] [9-Pin] to SP10 Com-2 RS485
SP10/Interact [6.1] Program Completed, Interact Shell Installed incl Tag Editor Descriptions All Verified,
SP10 Is Showing Programmed Screen's.
Using CTC/PS10 Description Format: ABDH\1$B3:0,0 ,ect
CTC Set For Com-2, RS485, ABDH Driver, SLC5 Box Checked.
Not Sure w/SLC5/03 DH485 Cable Wiring ???
So far SLC5/03 CH-0 [RS232 LED Indicator Is Blinking] w/DH485 Protocol Setup.
1st Time Doing a CTC/Interact HMI.
Any Suggestions/Comments Really Welcomed.
UPDATED: 07.09.2009
Verified PS10 Com-2 Jumpers RS485, Attached File Is All I Found
To Date w/CTC&AB, AB's Pinout's Description's Not Matching CTC's
Pinout Description's. Not Sure How To Wire a Cable For RS/DH485
At This Time.
Thank's
Want to use SLC/5/03 OS302 B Rev10.Channel-0 [DH485] [9-Pin] to SP10 Com-2 RS485
SP10/Interact [6.1] Program Completed, Interact Shell Installed incl Tag Editor Descriptions All Verified,
SP10 Is Showing Programmed Screen's.
Using CTC/PS10 Description Format: ABDH\1$B3:0,0 ,ect
CTC Set For Com-2, RS485, ABDH Driver, SLC5 Box Checked.
Not Sure w/SLC5/03 DH485 Cable Wiring ???
So far SLC5/03 CH-0 [RS232 LED Indicator Is Blinking] w/DH485 Protocol Setup.
1st Time Doing a CTC/Interact HMI.
Any Suggestions/Comments Really Welcomed.
UPDATED: 07.09.2009
Verified PS10 Com-2 Jumpers RS485, Attached File Is All I Found
To Date w/CTC&AB, AB's Pinout's Description's Not Matching CTC's
Pinout Description's. Not Sure How To Wire a Cable For RS/DH485
At This Time.
Thank's